Tutoriale Online

Tutoriale Online Invata Online cum se face si cum este corect. Learn Online How Must To Do !

Online Tutoriale Kernel Upgrades

Posted by ascultradio on September 3, 2009

Kernel Upgrades :

Make sure to install the latest kernel where all proprietary drivers, if applicable, are certified/supported.

Note that proprietary drivers are often installed under /lib/modules/<kernel-version>/kernel/drivers/addon. For example, the EMC PowerPath drivers can be found in the following directory when running the 2.4.21-32.0.1.ELhugemem kernel:

$ ls -al /lib/modules/2.4.21-32.0.1.ELhugemem/kernel/drivers/addon/emcpower
total 732
drwxr-xr-x    2 root     root         4096 Aug 20 13:50 .
drwxr-xr-x   19 root     root         4096 Aug 20 13:50 ..
-rw-r--r--    1 root     root        14179 Aug 20 13:50 emcphr.o
-rw-r--r--    1 root     root         2033 Aug 20 13:50 emcpioc.o
-rw-r--r--    1 root     root        91909 Aug 20 13:50 emcpmpaa.o
-rw-r--r--    1 root     root       131283 Aug 20 13:50 emcpmpap.o
-rw-r--r--    1 root     root       113922 Aug 20 13:50 emcpmpc.o
-rw-r--r--    1 root     root        75380 Aug 20 13:50 emcpmp.o
-rw-r--r--    1 root     root       263243 Aug 20 13:50 emcp.o
-rw-r--r--    1 root     root         8294 Aug 20 13:50 emcpsf.o
$

Therefore, when you upgrade the kernel you must ensure that all proprietary modules can be found in the right directory so that the kernel can load them.

To check which kernels are installed, run the following command:

$ rpm -qa | grep kernel

To check which kernel is currently running, execute the following command:

$ uname -r

For example, to install the 2.4.21-32.0.1.ELhugemem kernel, download the kernel-hugemem RPM and execute the following command:

# rpm -ivh kernel-hugemem-2.4.21-32.0.1.EL.i686.rpm

Never upgrade the kernel using the RPM option ‘-U’. The previous kernel should always be available if the newer kernel does not boot or work properly.

To make sure the right kernel is booted, check the /etc/grub.conf file if you use GRUB and change the “default” attribute if necessary. Here is an example:

default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
title Red Hat Enterprise Linux AS (2.4.21-32.0.1.ELhugemem)
        root (hd0,0)
        kernel /vmlinuz-2.4.21-32.0.1.ELhugemem ro root=/dev/sda2
        initrd /initrd-2.4.21-32.0.1.ELhugemem.img
title Red Hat Enterprise Linux AS (2.4.21-32.0.1.ELsmp)
        root (hd0,0)
        kernel /vmlinuz-2.4.21-32.0.1.ELsmp ro root=/dev/sda2
        initrd /initrd-2.4.21-32.0.1.ELsmp.img

In this example, the “default” attribute is set to “0” which means that the 2.4.21-32.0.1.ELhugemem kernel will be booted. If the “default” attribute would be set to “1“, then 2.4.21-32.0.1.ELsmp would be booted.

After you installed the newer kernel reboot the system.

Once you are sure that you don’t need the old kernel anymore, you can remove the old kernel by running:

# rpm -e <OldKernelVersion>

When you remove a kernel, you don’t need to update /etc/grub.conf.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: